Author Archive: Julie Dinsmore

Basement Subfloor Installation Requirements

The condition of your subfloor is a key for your floor renovation, especially for the long-term lifespan of your laminate. It helps to transform your space from a slab of concrete/ wood into something more attractive and decorative.

Before laying a single plank make sure your subfloor is appropriate to provide your new laminate flooring an excellent living area.

Standard Requirements for Subfloor

There is no difference what type of subfloor you have or plan to have, it should meet a certain set of standard requirements for basement subfloor installation. Here are a few considerations for you to make before unrolling your underlayment and installing the first plank.

–       Flat surface

In order to support your flooring properly, all types of subfloors must be flat. Acceptable biggest difference between two adjacent high points is 3/16 of an inch. That is not a lot of separation in a 10-foot radius.

If excessive voids or bends in your subfloor are available, level it before starting your installation. Fill low areas or holes with a cement and latex compound. Wait until it dry thoroughly before your flooring is installed.

–       Absence of slopes

There should not be any slopes in your subfloor either. The slope must be fixed if it is larger than an inch per six feet.

–       Clean surface

Your floors can be damaged over time with dirt and debris. Before beginning any type of floor renovation, especially laminate flooring installation, always clean and dry your subfloor.

–       Right choice of material

Carpet or padding are inappropriate materials for basement subfloor laminate installation. The ideal subfloors are made of wood and concrete. It is acceptable to install your flooring over an existing one, but always check prior to installation if the material is suitable for your basement subfloor installation.

Remember, the following materials are not suitable for a laminate installation: glued vinyl, cushioning, residential carpet. If one of these types of flooring is yours, then it should be removed before laminate installation.

The following types of subfloors are appropriate for laminate flooring:

  • Concrete
  • Vinyl that is not glued down to another subfloor
  • Terrazzo
  • OSB board
  • Exterior grade plywood
  • Particle board
  • Existing wood, not adhered to concrete
  • Ceramic

During your installation both subfloors and underlayment deserve as much attention as the actual flooring itself. Keep it in mind and you will be satisfied with a perfect end-result of your floor renovation.


Things to consider when choosing the best lawn care services in Pulaski VA

In order to do this reducing the prices and also optimizing the enjoyment you will certainly have when appreciating the time invested outside, you need to think about working with the finest firm which will certainly supply you a top quality job. If you are living in Pulaski VA, you ought to employ a neighborhood firm to do this work for you, and also by that you could conveniently offer a comments which will certainly be of usage for the various other individuals living in this location, as well as obtain with some of the evaluations offered online, in order to discover the finest fit.

And also when you have actually thought about working with a neighborhood, the procedure of assessment will certainly function much easier for you, because you will not require to rely on somebody that you do not understand, or to place on your own at threat when taking into consideration some testimonials based on various other environment situations. We are all conscious that this task is not an issue just on the top quality of the business’s job, considering that there are lots of variables which are appropriate to it.

Considering that all of their job is based in your location, as specialists, they are currently mindful concerning all the points which could come across, thinking about the temperature levels, rains and also every little thing comparable., you will certainly reduce the threat of functioning with somebody which is not well conscious regarding all of the problems that need to be thought about.

Lastly, when assessing the firm’s deals, you should have a look at the various other official points, such as the insurance policy they will certainly offer you. If they are not specialist sufficient, some undesirable injuries could take place while the employees go to your location, so make certain that if something of this kind occurs, you will not supervise. Keep in mind that dealing with an experts which have a great deal of favorable experience in the past is the most safe point to do, to ensure that you will not have some exterior responsibilities which you have not intended performing in front.

In order to do this lessening the expenses and also taking full advantage of the satisfaction you will certainly have when delighting in the time invested outside, you need to take into consideration working with the finest firm which will certainly supply you a high quality job. And also when you have actually thought about employing a regional, the procedure of examination will certainly function much easier for you, given that you will not require to rely on a person that you do not recognize, or to place on your own at threat when thinking about some evaluations based on various other environment scenarios. Given that all of their job is based in your location, as specialists, they are currently mindful regarding all the points which might come across, taking into consideration the temperature levels, rains as well as every little thing comparable.

How Much Does Finished Basement Cost?

Transforming your basement into a playroom for the kids, home theatre, second living room or workshop is a great way to make your home more versatile, improve the value of a property and expand the usable square footage. Besides, this project is a serious undertaking, and it is essential to estimate an average cost to finish a basement to the desired idea and standard required to meet building codes.

Finished Basement Cost

Before calculating your budget, it is important to know how the term “finished” is defined in building codes define In general, in finished basement there should be:

  • any dampness or water leakage resolved
  • electrical wiring and plumbing behind finished walls enclosed
  • an emergency exit for a habitable room added
  • accessible electrical panel boards and plumbing shut-offs provided
  • walls insulated, trimmed or painted them
  • adequate ventilation installed
  • habitable rooms at least 70 square feet and no less than 7 feet in any direction made

Many factors affect the cost of finishing a basement, the typical of them include the size of the room, its purpose and your local building codes. Basement renovations in Toronto range from $30 to $75 per square foot. On average, the cost to finish basement will fall between $6,500 to $18,500 or even more for larger spaces. But this sum has the potential of a 70-75% return on investment.

Remodeling, basement subfloor installation or finishing a basement needs a range of costs, from demolition work to new ventilation. To minimize expenses consider of common costs that include:

  • Demolition: up to $2,000 could be the price of demolition of old structures.
  • Foundations: repair of existing foundations could add $10,000 to the cost of the project.
  • Permits: A permit for electrical services or plumbing are generally inexpensive, and only cost approximately $50 to the budget.
  • Contractors: to install properly ventilation, electric points and plumbing. Approximately plumbers charge $45 to $150 per hour; electricians charge $40 to $100 per hour and painters – $15 to $20 per hour.
  • Waterproofing: an essential step for eliminating dampness and future structural issues will cost approximately $7,000.

At House Renovations we believe that every our customer deserves the greatest finishing even in finished basement. Your design can be limited only by your budget and imagination.

Bolted tanks – why are they better than the other types and what can be stored in bolted tanks


what can be stored in bolted tanks

When it comes to purchasing a bolted tank, many people are confused over their options when considering purchasing one for their company. But the truth is, there are a varieties of materials that can be stored inside and they will serve you as a moderated version of the classic design. They are accepted as a solution when in need of storing something because almost every type of liquid can be kept inside. Furthermore, if you consider to purchase one, you will make some savings, since this type is made by steel and their quality is very high. They are made from one panel which can be moderated furthermore and a varieties of changes can be done, considering its size and shape. They come in varieties of sizes, which is a good thing, since you can choose how much space you need in order to store a certain amount of liquid.

Storing portable water

When it comes to storing water, this type of tanks is commonly used for this thing. If you decide to put a drinking water inside, you will be sure that the water will be save from external factors, such as bacteria. This kind of tanks are made in order to expand the capacity of storing a drinkable water, and on the inside, they are covered with carbon steel and a lot of materials which will ensure you that the liquid inside will be safe from the environmental factors. In order to get more familiar with the preferences that the water must meet in order to be safe for drinking, you can follow this link.

Storing an agricultural or industrial water

In many industries, bolted steel tanks are purchased when storing water in order to water the soil or for a commercial usage. When considering a bolted tank in order to store a water of this kind, you can order a similar one. Since the water you will store in won’t be a drinkable one, they can be made by a mixture of other materials, which is making them cheaper than the first type.

Store water in order to be safe from fire

Many facilities are in need of using a storage of this kind when it comes to saving a water made for people’s safety. In case of an emergency, people are using them in order to put down the fire. In this case, the bolted tanks are the best choice, since they can help you get the wanted protection, considering the material of which they are made.

Store the water that is going in the waste

Considering the laws, more of them are very strict when it comes to spoiling out the unintended water. When working in this industry, you are probably aware about the urgency of having a good tank to store your water in, since it may has a raw waste inside it. Those containers are made in order to keep the water inside, without the option of destroying the tank itself.


 If you are working into some of the previously mentioned industries, probably you are already aware how important is to have a place where you can store the liquids. When it comes to a water for drinking, there are certain things that must be followed, and one of them is the material of which the tank is made. It is very important that you know all the possible options in order to make an order from a manufacturer, since you can’t store any type of liquid in a non-adequate tank. Since some of the liquids may contain some chemical which can destroy the environment, and destroy your tank as well, you should be well aware over the material before you do anything else while storing the liquid. Also, another great thing to be considered is that when choosing a bolted metal tank, you are making an investment in a quality material which is long lasting, and that will keep you safe from further costs. And when it comes to expanding it in case if you need a bigger storage capacity, you can always easily install an additional part to it.